Sig Sauer - Holosun Optics

*** WE NO LONGER WORK ON CALI-COMPLIANT or LCI (Loaded Chamber Indicators) SLIDES ***

Our optics cuts are precision CNC milled to exacting tolerances to give you industry leading performance. A primary feature of our cradle cutting method is the fact the optic will be tight in the cut and will have extremely little to no ability to move once in place (this is by design). Our cuts will also have precise and consistent recoil bossing (where available) to add strength to the cut. This is to ensure the repeated reciprocal forces from firing are not translated exclusively to the mounting screws. No matter if you are in military/law enforcement community, competition community, or personal defense community, our cuts will ensure your optic survives the harshest of firing schedules. 

P220/225/226/227/228/229 will have an exposed Safety Block after the optic cut. If we do not have your optic to mount after the work has been completed, you have to insert your Safety Block Spring then mount the optic to hold that assembly in place. P226 Optic Cuts are limited due to the lightening pocket on the underside of the slide. If you're unable to selcet a certian combo of optic and 226, this is why.

***For customers purchasing the C series optic cut in order to use the 509 adapter plate, the standard cut will not be the correct length. If you want to use the adapter plates, please specify this intent in your individual order notes. The cut will be cut slightly oversized for their plate (your C series optic cut will NOT have a tight fit).***

*Optics Not Included*